PROJECTS

Club Nautico Marina di Brondolo - Chioggia - Italy
Brand + type - Marinello Cabin 26

Lenght waterline - 7.65m

Width - 2.55m

Depth - 0.90m

Finsulate® antifouling foil - 28m2

Cantieri Di Aprilia - Aprilia Marittima - Italy
Brand + type - Najad 343

Lenght waterline - 10.20m

Width - 3.40m

Depth of keel - 1.65m

Finsulate® antifouling foil - 27m2

Marina Hannibal - Monfalcone - Italy
Brand + type - Elan Impression 434

Lenght waterline - 11.45m

Width - 4.18m

Depth of keel - 1.90m

Finsulate® antifouling foil - 40m2

Old antifouling layers are removed and epoxy primer is applied.
First strips of Finsulate® antifouling foil are applied.
Attaching Finsulate® antifouling foil from to the waterline to the middle of the boat.
Left side of the boat and the rudder are covered in Finsulate® antifouling foil.
Left side of the boat is almost fully covered in Finsulate® antifouling foil.
Starting to apply Finsulate® antifouling foil on the right side of the boat.
First a strip of Finsulate® antifouling foil is applied at the waterline of the boat.
Covering the right side of the boat in Finsulate® antifouling foil.
Bow truster is half covered in Finsulate® antifouling foil.
Bow truster is fully covered in Finsulate® antifouling foil.
The appliance Finsulate® antifouling foil to the hull is almost complete. Next step is to change the boat from cradle to crane to apply the last patches.
The appliance Finsulate® antifouling foil to the hull is almost complete. Next step is to change the boat from cradle to crane to apply the last patches.
The appliance Finsulate® antifouling foil to the hull is almost complete. Next step is to change the boat from cradle to crane to apply the last patches.
Boat on crane to prepare and apply Finsulate® antifouling foil.
Sanding the last patches before applying epoxy primer paint and Finsulate® antifouling foil.
Applying epoxy primer on the last patches before applying Finsulate® antifouling foil.
The whole hull is fully covered in Finsulate® antifouling foil. Now the boat can stay on shore for winterstorage or go directly into the water.
Back into the water to enjoy fouling free sailing!

Manoel Island Yacht Marina - Gzira - Malta
Brand + type - Princess 35 Fly

Length waterline - 9.50m

Width - 3.60m

Depth - 0.90m

Finsulate® antifouling foil - 35m2

First a strip of Finsulate® antifouling foil is applied at the waterline of the boat.
Applying a strip of Finsulate® antifouling foil at the waterline of the boat.
Applying a strip of Finsulate® antifouling foil along the center line of the boat.
The strips of Finsulate® antifouling foil at the waterline and the center line of the boat are ready.
Starting to apply strips of Finsulate® antifouling foil from the waterline to the center line of the boat.
Applying strips of Finsulate® antifouling foil from the waterline to the center line of the boat.
The left side of the boat is almost ready.
Applying the last strips of Finsulate® antifouling foil.
Applying Finsulate® antifouling foil to the back of the boat.
Applying Finsulate® antifouling foil to the rudders of the boat.
Back side and rudders are covered with Finsulate® antifouling foil.
Back side is ready.
The boat is ready for fouling free sailing!

WHAT IS IT

WHAT IS IT

WHAT IS IT

Official Finsulate® reseller

for the Adriatic region

'Protect your boat, protect our seas'

PROJECTS

Old antifouling layers are removed and epoxy primer is applied.

First strips of Finsulate® antifouling foil are applied.

Attaching Finsulate® antifouling foil from to the waterline to the middle of the boat.

Left side of the boat and the rudder are covered in Finsulate® antifouling foil.

Left side of the boat is almost fully covered in Finsulate® antifouling foil.

Starting to apply Finsulate® antifouling foil on the right side of the boat.

First a strip of Finsulate® antifouling foil is applied at the waterline of the boat.

Covering the right side of the boat in Finsulate® antifouling foil.

Bow truster is half covered in Finsulate® antifouling foil.

Bow truster is fully covered in Finsulate® antifouling foil.

The appliance Finsulate® antifouling foil to the hull is almost complete. Next step is to change the boat from cradle to crane to apply the last patches.

The appliance Finsulate® antifouling foil to the hull is almost complete. Next step is to change the boat from cradle to crane to apply the last patches.

The appliance Finsulate® antifouling foil to the hull is almost complete. Next step is to change the boat from cradle to crane to apply the last patches.

Boat on crane to prepare and apply Finsulate® antifouling foil.

Sanding the last patches before applying epoxy primer paint and Finsulate® antifouling foil.

Applying epoxy primer on the last patches before applying Finsulate® antifouling foil.

The whole hull is fully covered in Finsulate® antifouling foil. Now the boat can stay on shore for winterstorage or go directly into the water.

Back into the water to enjoy fouling free sailing!

First a strip of Finsulate® antifouling foil is applied at the waterline of the boat.

Applying a strip of Finsulate® antifouling foil at the waterline of the boat.

Applying a strip of Finsulate® antifouling foil along the center line of the boat.

The strips of Finsulate® antifouling foil at the waterline and the center line of the boat are ready.

Starting to apply strips of Finsulate® antifouling foil from the waterline to the center line of the boat.

Applying strips of Finsulate® antifouling foil from the waterline to the center line of the boat.

The left side of the boat is almost ready.

Applying the last strips of Finsulate® antifouling foil.

Applying Finsulate® antifouling foil to the back of the boat.

Applying Finsulate® antifouling foil to the rudders of the boat.

Back side and rudders are covered with Finsulate® antifouling foil.

Back side is ready.

The boat is ready for fouling free sailing!